TELCO

  • SM Series high-power self-contained Sensor

    Automation
    • Operation mode and max range:
    • Thru-beam: 0-70 m
    • Cable or plug connection
    • Sensitivity adjustment via control input
    • Power and output indicators
    • High tolerance to hostile environments
    • 10-30 V dc supply voltage
    • 5 wire, NPN or PNP transistor output
    • Test input
    • High excess gain
    • IP 69K rating
    • Optical cross talk elimination of 4 independent sensor channels selectable via wire connection
  • SpacePak (SM2000 series)

    Automation
    • Operation mode and max sensing range:
    • Thru-beam: 0 –45 m
    • Diffuse proximity: 0–3 m
    • Retro reflective: 0 –12 m
    • Polarised retro reflective: 0 –10 m
    • Background suppression: 0 –1.5 m
    • Compact rectangular housing (50 x 50 mm)
    • Cable or rotatable plug connection
    • Sensitivity adjustment via potentiometer
    • Switch selectable light or dark function
    • Adjustable on/off time delay
    • Power, output and signal level indicators
    • 10-30 V dc or 12-240 V ac/dc supply voltage
    • 4 wire, NPN/PNP transistor output or
    • 5 wire relay output
  • SG 1

    Area Sensor
    • 0-4 m sensing range
    • 34 to 194 cross scanning beams
    • Active height of 650 mm to 1800 mm
    • Detector length 850 mm to 2100 mm
    • Flexible cable connection
    • Automatic sensitivity adjustment
    • Slim line (10×28 mm), leading edge (37,5×13 mm) or water-resistant slim line (12×30 mm) detector
    • Power, output and signal status indicators
    • 12 – 36 V dc supply voltage
    • 5 wire, solid state relay output
    • Test input
    • Time-out function via wire connection
    • Static and dynamic applications
  • SG 10

    Area Sensor
    • 1-10 m sensing range
    • 34 to 274 cross scanning beams
    • Active height of 650 mm to 2535 mm
    • Detector length of 850 mm to 2800 mm
    • Cable or plug connection
    • Automatic sensitivity adjustment
    • Water-resistant, slim line (12×30 mm) detector housing
    • Power, output and signal status indicators
    • 12 – 36 V dc supply voltage
    • 5 wire, solid state relay output
    • Test input
    • Light/dark function via wire connection
  • SS02

    Area Sensor
    • 0-10 metre sensing range
    • 12 to 384 channels (parallel beams)
    • Available with channel spacing of 5, 10 or 20 mm
    • Housing length of 300 mm to 1980 mm
    • Plug connection
    • 18-30 V dc supply voltage
    • Power, output and system status indicators
    • 33×36 mm aluminium housing with T-slot mounting
    • High tolerance to hostile environments
    • RS-485 serial communication
    • Up to 4 digital outputs with software configurable functions
    • Analogue output 4-20 mA and 0-10 V with software and control wire configurable function
    • PC software for programmable configuration and monitoring
  • TELCO LT/LR SERIES

    Automation
    • Long sensing distance up to 70m sensing distance
    • Wide variety of housing
    • High tolerance to hostile environment
    • Available with optional ATEX approval
    • Separate Amplifier (select from PA, MPA or PAB series)
  • TELCO MULTIPLEXED AMPLIFIER SERIES

    Automation

    In an industry where most products resemble each other, we have strived to make sure that Telco only resembles Telco – in terms of quality, reliability, performance and ease-of-use. This is no different for the multiplexed amplifier series, which has withstood the test of time for that exact reason.

  • TELCO PA 11 SERIES

    Automation
    • Automatic sensor test
    • Switch Selectable long / short range
    • Power output and Signal Level indicator
    • 1 relay and/or 1 transistor output
  • TELCO PAB SERIES – Din Rail Mounting

    Automation
    • Connected via a rail bus connector position on the din rail (connected up to 9 amplifiers)
    • Master/slave system
    • Power, output, alarm, signal level and master/slave address indicators
    • Optical cross talk  prevent.
Automation
Mechanical
Scroll to Top