Specification
Seal Combination | Carbon Graphite/Ceramic – Standard |
---|---|
Seal Combination – E.L.S. | Tungsten Carbide/Ceramic |
Seal Combination | Carbon Graphite/Ceramic – Standard |
---|---|
Seal Combination – E.L.S. | Tungsten Carbide/Ceramic |
Maximum Hot Oil Temperature | 450°F |
---|
This 2-passage union was designed to cool and actuate Drum Brakes on Oil Rigs. It has a 1″ water and 1/2″ air passage. The water passage has a cartridge seal that can be repaired on the machine. The 981-300 union can also be used on many other Air/Hydraulic applications. Contact Deublin Engineering Department for complete specifications.
This is a small union designed for minimum water flow where space is a problem. The seals are Carbon Graphite-to-Stainless Steel. It has the same dimensions as Model 1005-020-038
Deublin has developed a number of hubmounted unions specifically designed to accommodate the passage of air between a vehicle’s stationary axles and its wheels. This allows tire pressure to be varied from inside the vehicle’s cab, and is already very popular in the logging industry and on military vehicles. The ability to vary the air pressure allows the driver to adjust pressure for the surface being traveled. Lower pressure with a broader footprint is suitable for soft terrain. Higher pressures and a smaller footprint is suitable for higher speed highway travel. Model 882, 2-passage union, Model 1115-000-001, Model 1102-025-001-004.
Optional | Tandem model as triple-passage design |
---|
Bronze Trim | Sizes 1/2” to 3” |
---|---|
Ferrous Trim | Sizes 1/2” to 3” |
Temperature | +406°F (+208°C) |
---|---|
Sizes 1/2” to 1-1/2” | Pressure 250 psi (17.2 BAR) |
Sizes 2” to 3” | Pressure 225 psi (15.5 BAR) |
for spraying-clamping-unclamping applications at steel-strip winders
In combination with SP0077 (2-Passage)
• grease is supplied to the winding mandrel tolubricate the moving elements of the winder
for clamping-unclamping applications at steel-strip winders
In combination with SP0077 (2-Passage)
• grease is supplied to the winding mandrel to lubricate the moving elements of the winder
For clamping-unclamping applications at steel-strip winders
Max. Pressure | 5,075 PSI 350 bar |
---|---|
Max. Speed | 100 RPM 100/min |
Max. Temperature | 205ºF 95ºC |